Install The Cable Management Support Arm. It; Install The Cable Management Arm - IBM Storwize V7000 Unified Quick Installation Manual

Figure 27. Install the cable management support arm. It can be installed on either side (left or
right). The graphic shows the rear of the rack.
4.
Figure 28. Install the cable management arm.
5. Make sure that the support rail is located between the 2 nail head features.
40
Storwize V7000 Unified: Quick Installation Guide
Note: Make sure the arm with junctions is facing the file module.
Place the cable management arm on the support arm. Pull out both cable
management arm pins and then slide the cable management arm tabs into the
slots on both inside and outside of the slide rail. Push the tabs until they snap
into place.
Arm junctions