Gbps Ethernet Ports On The Rear Of The; Rear View Of A Model 2076-212 Or A Model - IBM Storwize V7000 Unified Quick Installation Manual

Figure 5. 10 Gbps Ethernet ports on the rear of the Storwize V7000 enclosure
v
v
Expansion enclosure components
Figure 6 shows the rear view of an expansion enclosure and identifies the location
of the power supply units and the canisters. The ports and their use are described
later in this section.
Figure 6. Rear view of a model 2076-212 or a model 2076-224 expansion enclosure
v Power supply units are on the left and right of the canisters. Power supply 1
v Two canisters are housed in the middle of the enclosure. Each canister is known
Figure 7 on page 7 shows the rear view of an expansion enclosure and identifies
the SAS port locations.
6
Storwize V7000 Unified: Quick Installation Guide
1 10 Gbps Ethernet port 3 which is the left port.
2 10 Gbps Ethernet port 4 which is the right port.
1
is located on the left. Power supply 2 is located on the right. Power supply 1
is inserted top side up, and power supply 2 is inverted, or top side down.
Important: The power supply units for the control enclosure and expansion
enclosure are not interchangeable.
as an expansion canister. The upper canister, as shown in Figure 6, is canister
3 , and the lower canister is canister 4 . Canister 3 is top side up, and canister
4 is inverted, or top side down.
1 2
2 1
3
4
2