Install The Cma Onto The Rails; Cable Management Arm Parts Inventory - IBM 3453-F7E Install Manual

Install the CMA onto the Rails.

This section provides installation instructions for the cable management arm (CMA) kit:

Cable management arm parts inventory

CMA kit for the Toolless Slide Rail Kit with CMA
1 One CMA
2 One CMA support bar
3 Documentation
Figure 13: CMA Components
NOTE: These management arms are an integral component of the system
design. Their use is critical for effective installation, for reliability of operation and for
ease and effectiveness of service. The cable management arms allow for orderly
routing of cables in system racks; they enable individual server enclosures to be slid out
on rails while powered and operating, minimizing disruption and system outages and
simplifying service operations. For these reasons and more, the cable management
arms are required. Should you choose not to install the management arms, IBM will not
be able to install or support your Cloud Pak for Data System. Should they be removed
after installation, you will void your system warranty and onsite service will not be
provided.
© Copyright IBM Corporation 2020, 2021. Customer Install Guide, Connector Node 31