Step 22. Problems With Initial Configuration - IBM Storwize V7000 Unified Quick Installation Manual

Table of Contents

Advertisement

Step 22. Problems with initial configuration

This topic helps you to solve configuration problems.
About this task
If USB key is missing or faulty:
v Contact the IBM Support Center.
v Install the latest InitTool.exe (or reinstall if tool is not launching). Go to
Before loading the USB flash drive verify it has a FAT32 formatted file system.
Plug the USB flash drive into the laptop. Go to Start (my computer), right-click the
USB drive. The general tab next to File system should say FAT32.
v If the USB flash drive is not formatted as FAT32, format it. To format, right-click
InitTool.exe is not loaded on the USB key, or fails to launch:
v Install the latest InitTool.exe (or reinstall if tool is not launching). Go to
Amber LED on node canister does not stop flashing during install:
Allow at least 15 minutes for the LED to stop flashing. If flashing continues
beyond 15 minutes, remove the USB flash drive and insert in your laptop.
Navigate to the satask_results.html file and scan for errors and follow the service
action recommendation. Take that action and retry installation.
An error is posted in the satask_results html:
Take the recommended action, reboot the node, and restart the procedure.
Amber LED on node canister does not stop flashing during install:
Allow at least 15 minutes for the LED to stop flashing. If flashing continues
beyond 15 minutes, remove the USB flash drive and insert in your laptop.
70
Storwize V7000 Unified: Quick Installation Guide
http://www-933.ibm.com/support/fixcentral/options and select the following
options to locate the tool. The options are listed under the Select product tab, at
the bottom of the page:
– Product Group: Storage Systems
– Product Family: Disk Systems
– Product: IBM Storwize V7000 Unified
– Release: All
– Platform: All
it, select format, under filesystem. Select FAT32 and then click Start. Continue as
prompted.
http://www-933.ibm.com/support/fixcentral/options and select the following
options to locate the tool. The options are listed under the Select product tab, at
the bottom of the page:
– Product Group: Storage Systems
– Product Family: Disk Systems
– Product: IBM Storwize V7000 Unified
– Release: All
– Platform: All

Advertisement

Table of Contents
loading

Table of Contents