This Figure Shows 24 Drives And Two End Caps (Model 2076-124); Rear View Of A Model 2076-112 Or A Model - IBM Storwize V7000 Unified Quick Installation Manual

Figure 2. This figure shows 24 drives and two end caps (model 2076-124).
Control enclosure components
Figure 3 shows the rear view of a control enclosure and identifies the location of
the power supply units and the canisters.
Figure 3. Rear view of a model 2076-112 or a model 2076-124 control enclosure
v Power supply units are located on the left and right of the canisters. Each unit
v Two canisters are housed in the middle of the enclosure. Each canister is known
Figure 4 on page 5 shows the rear view of a model 2076-112 or a model 2076-124
control enclosure and identifies the location of the ports.
4
Storwize V7000 Unified: Quick Installation Guide
1 2
1
contains a battery. Power supply 1 is located on the left. Power supply 2 is
located on the right. Power supply 1 is inserted top side up, and power
supply 2 is inverted, or top side down.
Important: The power supply units for the control enclosure and expansion
enclosure are not interchangeable.
as a node canister. The upper canister, as shown in Figure 3, is labelled 3 , and
the lower canister is labelled 4 . Canister 3 is top side up, and canister 4 is
inverted, or top side down.
2
3
4
3
2