Technical Data - Husqvarna LP 9505 Operator's Manual

Technical data

Net weight, kg/lb
Operation weight (EN500), kg/lb
Engine type
Engine power, kW/hp @rpm
Cooling system
Air filter
Pump traction system
Engines traction system
Relief valve traction system, MPa/psi
Vibration frequency, Hz/rpm
Pump vibration system
Motor vibration system
Safety valve vibration system, MPa/psi
Centrifugal force low, kN/Ibf
Centrifugal force high, kN/Ibf
Amplitude low, mm/in.
Amplitude high, mm/in.
Centrifugal force, kN/lbf
Operation speed, m/min or ft./min
Transport speed, m/min or ft./min
Max. tilt, degrees/%
Gradeability with vibration, degrees/%
Gradeability without vibration, degrees/%
Max. slope angle for operation downhill, degrees/%
Operation temperature, °C/°F
Fuel tank capacity, l/qt
Crankcase oil capacity, l/qt
Hydraulic oil, l/qt
1
As specified by the engine manufacturer. The power rating of the engine indicated is the average net power
output (at specified rpm) of a typical production engine for the engine model measured to SAE J1995. Mass
production engines may differ from this value. Actual power output for the engine installed on the final product
will depend on the operating speed, environmental conditions and other values.
44
Technical data
1
1660/3660
1675/3693
Kubota D1105, 3-cylinder Diesel
18/24.1 @2800
Combined water/hydraulic oil cooler and fan
Dry type
Gear type
Radial Piston
25/3626
42/2520
Gear type
Gear type
21/3.046
36/8093
72/16186
0.55/0.02
1.1/0.04
21.8/4900
24 or 79
48 or 157
20/36
55/45
29/24
14/25
-6/+45
30/31.7
5.1/5.39
21.5/22.7
1423 - 002 - 03.04.2020