To Lift The Product; To Safety The Product To A Transportation Vehicle - Husqvarna LP 9505 Operator's Manual

• Make sure that the load area on the transportation
vehicle and wheels on the product is clean.
• Remove ice and snow on the load area on the
transportation vehicle and the wheels on the product.
• Do not tow the product behind a vehicle.
• Make sure that the articulation joint lock is engaged.
To engage and disengage the articulation
Refer to
joint lock on page 19 .

To lift the product

WARNING: Make sure that the lifting
equipment has the correct specification to lift
the product safely. The type plate on the
product shows the product weight. The
decal on the product shows how to lift the
product. Refer to
page 14 .
WARNING: Do not lift a damaged product.
Make sure that the lifting eye, the vibration
damping units and the safety straps are
correctly installed and not damaged.
WARNING: Do not lift the product at the
lifting eye on the engine. Lift the product at
the lifting eye on the product only.
WARNING: Do not walk or stay below or
near a lifted product.
42
Lift and tie-down decal on
1. Make sure that the vibration damping units (A) are
correctly installed and not damaged. Refer to
a check of the vibration damping units on page 17 .
A
B
A
2. Engage the articulation joint lock (B). Refer to
engage and disengage the articulation joint lock on
page 19 .
3. Make sure that the lifting eye (C) is correctly installed
and not damaged.
4. Attach the lifting equipment to the lifting eye.
WARNING: Do not use metal hooks,
chains or other lifting equipment with
rough edges that can cause damage to
the lifting eye.
5. Lift the product gradually to prevent impact loads on
the product.
To safety the product to a transportation
vehicle
Note: The decal on the product shows how to safety the
product to a transportation vehicle. Refer to
down decal on page 14 .
1. Make sure that the articulation joint lock is engaged.
To engage and disengage the articulation
Refer to
joint lock on page 19 .
To do
C
A
B
To
Lift and tie-
1423 - 002 - 03.04.2020