To Replace The Fuel Prefilter And Fuel Filter; To Drain The Water Separator In The Fuel Filter - Husqvarna LP 9505 Operator's Manual

8. Fill the eccentric element with oil. Refer to
data on page 44 for correct quantity and type of oil.
9. Install the oil fill plug for the eccentric element.
10. Do the same procedure for the other end of the
product.
To replace the fuel prefilter and fuel
filter
WARNING: Use protective gloves to prevent
skin irritation. Fuel can come from the fuel
filter and onto your skin.
1423 - 002 - 03.04.2020
Technical
1. Remove the fuel filter (A) with a wrench.
A
2. Install a new fuel filter.
3. Disconnect the hoses on each side of the fuel
prefilter (B).
4. Install a new fuel prefilter. Make sure that the arrow
on the fuel prefilter agrees with the direction of the
fuel flow.
Refer to the engine manual for more information.
To drain the water separator in the fuel
filter
1. Put a bowl below the drain plug for the water
separator (A).
B
39