To Clean The Fuel Tank; To Do A Check Of The Engine Oil Level - Husqvarna LP 9505 Operator's Manual

To clean the fuel tank

1. Release the lock (A) to for the fuel tank strap (B).
D
D
B
E
2. Disconnect the 2 fuel hoses (C).
3. Disconnect the fuel sensor (D).
4. Remove the fuel tank (E) from the product.
32
B
A
A
C
5. Open the fuel tank cap (F).
6. Drain the fuel tank.
7. Use a fuel filter hook to pull out the fuel hose (G) and
the fuel strainer (H).
8. Clean the fuel tank and fuel strainer.
9. Install the fuel strainer in the fuel tank.
10. Install the fuel tank on the product.
11. Connect the fuel sensor.
12. Connect the 2 fuel hoses.
13. Attach the fuel tank strap.
14. Fill the fuel tank. Refer to
15. Make sure that there are no leaks from the fuel tank
and the fuel hoses.
Refer to the engine manual for more information.

To do a check of the engine oil level

1. Park the product on level ground and stop the
To stop the product on page 28 .
engine. Refer to
F
G
H
Fuel safety on page 17 .
1423 - 002 - 03.04.2020