Technical Data - Husqvarna CL400 Operator's Manual

Problem
The engine does not start.
The drill does not rotate.
The drill continues to rotate when the
drill operation bail is released.
The product does not operate cor-
rectly.
The product does not move when the
drive bail is engaged.
The drill head cannot be removed.
The insulation of the cable put into
the ground is damaged.
Engine
16
Cause
The fuel tank is empty.
The fuel tap is closed.
The fuel is old.
The throttle control is in STOP position.
The air filter is dirty.
The fuel tank cap is dirty.
There is fuel on the spark plug.
The spark plug is defective.
The belt is worn out.
The belt has moved out of the pulleys.
The lever does not put sufficient tension on the belt.
The drill operation bail is not engaged.
The wire from the drill operation bail is worn or damaged.
The drill is not installed correctly.
The drill is worn or damaged.
The air filter is dirty.
There is dirt in the fuel line or the fuel has expired.
The engine oil level is too low.
The wire from the drive bail is worn or damaged.
The transmission belts are worn.
The chain is broken or does not have sufficient tension.
The clutch discs in the transmission housing are worn.
There is unwanted material in the unit.
There is oxide in the system.
The cable outlet hole on the feeding fin is damaged.
The tube that contains the cable and which is part of the feeding fin is dirty.

Technical data

HONDA GCVx 145 4-stroke
spark ignition
HONDA GXV 160 4-stroke
spark ignition engines
1394 - 003 - 05.12.2023