Brocade Communications Systems 6510 Hardware Installation Manual page 50

Brocade 6510 Switch Technical Specifications
System component
FCIP (IP over Fibre
Channel)
Port Status
Ethernet
System component
SFP GbE ports
Ethernet management port RJ-45
LEDs
System component
System power LED
System status LED
Ethernet port activity LED
Ethernet port speed LED
Serial console port LED
FC port status LED
Fan assembly LED
Other
System component
Serial cable
RJ-45 to DB9 adapter
RJ-45 connector
50
Description
Complies with FC-IP 2.3 of FCA profile
Bicolor LED (amber/green)
Description
10/100 Mbps Ethernet (24, 36, and 48 ports)
Description
One power status LED (below) on the left side.
One system status LED (above) on the left side.
One Ethernet port activity LED on the left side.
One Ethernet port speed LED on the left side.
The serial console port LEDs do not light up at any time, even when a cable is
inserted and the link is active.
One bicolor (green/amber) port status LED for each port on the switch.
One power supply/fan assembly LED above the AC power switch on each power
supply on the non-port side of the switch.
Description
RJ-45 console cable
RJ-45 to DB9 for console cable
Uses an RJ-45 connector for the serial port
Brocade 6510 Hardware Installation Guide
53-1002174-10