Safety; Safety Instructions; Intended Use; Training Of Qualified Personnel - Festo CPX-AP-I-4IOL-M12 Instructions Manual

Safety

2 Safety
2.1

Safety instructions

– Take into consideration the legal regulations for the respective destination.
– Use the product only within the defined values è 12 Technical data.
– Observe labelling on the product.
– Observe further applicable documents.
– Store the product in a dry, UV- and corrosion-protected environment.
– Before working on the product:
Switch off the power supply and secure it against being switched on again.
2.2

Intended Use

The product described in this document is intended only for use as an interface between an automa-
tion system CPX-AP and devices with IO-Link Port.
Use the product only as follows:
– Use only in an industrial environment. Outside industrial environments, e.g. in commercial and
residential/mixed-use areas, it may be necessary to take measures to suppress radio interference.
– Use only in combination with modules and components that are permissible for the respective
product variant è www.festo.com/catalogue.
– Only use the product if it is in perfect technical condition.
2.3

Training of qualified personnel

Installation, commissioning, maintenance and disassembly should only be conducted by qualified per-
sonnel. The qualified personnel must be familiar with installation of electrical control systems.
3

Additional information

– Accessories è www.festo.com/catalogue.
4

Service

Contact your regional Festo contact person if you have technical questions è www.festo.com.
5

Product overview

5.1

Function

The module provides four IO-Link Ports Class B (type B) for connecting IO-LinkDevicesto an automa-
tion system CPX-AP.
The module behaviour can be parameterised è 9 Parameterisation.
Status and error messages are indicated by LED displays on the module and reported to the interface
via system communication.
Festo — CPX-AP-I-4IOL-M12 — 2020-03 5