6 Operation
6.1.4.
Setting the preset counter / pulse value (ImPS)
The instrument has seven adjustment ranges:
LED Display
1
2
3
4
5
6
7
Setting procedure:
•
Press
•
Press and hold [Set].
•
The current numerical value flashes for 5 seconds, then the first
digit is active (digit flashes, can be changed).
•
Set the desired value as specified in the following table.
•
First select the desired adjustment range (1, 2, 3 etc.).
•
Enter the number from left (first digit) to right (fourth digit).
•
Press
As soon as the first digit flashes, there are three options (flashes on
grey background):
Press
[Set]
briefly once
each time.
36
Set
OU1
[Mode/Enter]
until
[Mode/ Enter]
briefly when all four digits are set.
The flashing digit is increased. 0 is displayed after
9.
[Set]
pressed once
[Set]
pressed once
[Set]
pressed once
Value
0.001 to 9999 Nm³
10.00 to 99.99 Nm³
100.0 to 999.9 Nm³
1000 to 9999 Nm³
10000 to 99990 Nm³
100000 to
999900 Nm³
1000000 Nm³
to ImP.
ImPS
is displayed.
Resoluti-
on
0.001 Nm³
0.01 Nm³
0.1 Nm³
1 Nm³
10 Nm³
100 Nm³