Table of Contents
Advertisement
3
Specifications
3.1.
Use
The compressed air counter is intended exclusively for use in pipe
systems for working compressed air, provided that the calibration
certificate does not explicitly allow use with other gases.
Thanks to the design, operation in systems that are under pressure
up to PN16 is possible.
Use which deviates from that described endangers the safety of
people and of all the measuring equipment and is thus not permis-
sible.
The manufacturer accepts no liability for damages that occur as a
result of improper or inappropriate use or installation.
To avoid damage to the instrument or health hazards, no manipula-
tion using tools may occur on the measuring units unless expressly
defined in this operating manual.
Changing the sensors while in operation is possible.
The compressed air counter may only be operated under the ambient conditions specified in the technical data. Otherwise, inaccurate measurements occur or instrument malfunctions become possible.
To ensure the safety of the user and the functionality of the instru-
ments, the commissioning steps, checks and maintenance work
recommended by the manufacturer are to be complied with and
carried out.
Use authorised personnel when changing the sensors
during operation. Further details Assembly under
pressure, page 21.
3 Specifications
7
Advertisement
Table of Contents
