5 Initial operation
5.1.5.
Installation position of the sensor
Do not install the sensor in the crossed-out installation positions
shown in the following graphic. In the event of a limited flow, the
specified accuracy cannot be maintained.
Schematic diagram (the arrow shows the direction of flow for the
medium):
Vertical installation posi-
tion, direction of flow
horizontally to the left,
sensor downwards
24
Horizontal installa-
tion position,
direction of flow
vertically down-
wards, sensor to
the rear
Horizontal installation posi-
tion, direction of flow hori-
zontally to the rear, sensor
to the left (heated sensor
element upwards)