Linhai ATV300-D T3b Owner's/Operator's Manual page 110

be kept even with the center of the drill point approximately
below the top of the fill hole.
NOTE: Do not add lubricant to the bottom of the fill plug threads.
The correct gear case lubricant to use is SAE GL-5 80W/90
Weight Gear Lube.
Oil Changing Procedure
lbs/15~20N.m).
3. Remove fill plug and add 290ml of SAE GL-5 80W/90 Weight
Gear Lubricant and inspect oil level. Oil level should be kept
even with the center of the drill point (approximately below
the top of the fill hole).
4. Reinstall the
lbs/22~30N.m).
5. Check for leaks.
16. MAINTENANCE
WARNING
Operating your ATV with worn tires, improperly inflated tires,
non-standard tires or improperly installed tire will affect vehicle
OWNER'S/OPERATOR'S MANUAL
ATV300-D T3b
fill plug. Tighten
- 106 -
1. Remove drain plug.
Catch and discard used
oil properly.
2. Clean and reinstall
the drain plug with a new
sealing washer
tighten securely (11~14 ft.
securely (16~22
16.0
and
ft.