Linhai ATV300-D T3b Owner's/Operator's Manual page 72

OWNER'S/OPERATOR'S MANUAL
ATV300-D T3b 16.0
CAUTION
If you ATV becomes immersed,take it to your dealer before
starting the engine.Major engine damage can result if the
maching is not thoroughly inspected.
If it is impossible to take it to a dealer before starting, follow the
steps outlined below.
 Move the ATV to dry land or at the very least, to water depth
not more than 8 inch (200mm).
 Turn the fuel valve to ―OFF‖.
 Remove the spark plug.
 Loosen the carburetor drain screw (1)
 Turn the engine over several
times with electric start.
 Dry the spark plug and reinstall
or replace with a new plug.
 Tighten the carburetor drain
screw(1)
 Turn the fuel valve to ―ON‖.
 Attempt to start the engine. If
necessary repeat the ―drying‖
procedure.
 Take the machine to your dealer for service as soon as
possible whether you succeed in starting it or not.
If water has been ingested into the CVT system, take the ATV to
your dealer for service as soon as possible
12. RIDING
Trail Obstacles
- 68 -