OWNER'S/OPERATOR'S MANUAL
ATV300-D T3b
16.0
possible serious personal injury or death.
Handlebar Adjustment
Your ATV has handlebars
which can be adjusted for
your personal fit.
1. Remove the handlebar cover.
2. Loosen the four bolts.
3. Adjust handlebar to desired
height. Be sure handlebars do
not hit gas tank or any other part
of machine when turned fully to left or right.
4. Torque handlebar adjuster block to 10-12 ft.Ibs(14-16Nm).
NOTE: Tighten bolts so there is an equal gap at the front and
rear of the handlebar block. Improper gap will result in improper
fit of upper pod.
16. MAINTENANCE
The following items should be checked occasionally for tightness;
or if they have been loosened for maintenance service.
Wheel Nut Torque Specifications
Bolt Size
Specification
- 92 -