By switching to low range while operating at low ground speeds,
the air temperature in the clutch will be reduced. Reducing the
temperature inside the clutch cover extends the life of the CVT
components (belt, cover, etc.).
Adjust the center distance of the CVT ( 300cc only):
1. Remove crankcase filter cover, cover protector and crankcase
cover.
2. Loosen the left link bolts③ , right link bolts② and engine
mounting bolts ① .
3. Adjust the supporting bolt and measure the size L,D;
4. Tighten the engine mounting bolts ① , right link bolts ② and left
link bolts③ ;
5. Install crankcase filter cover, cover protector and crankcase
cover.
NOTE:
1. Never operate the engine when adjusting the CVT;
2. The adjustment of the CVT must be done by your dealer.
13. CVT SYSTEM
When To Use Low Range ( 300cc only)
The following lists provide a guideline for when to use low range
rather than high.
OWNER'S/OPERATOR'S MANUAL
ATV300-D T3b
- 73 -
16.0