A M P R E S E A R C H P O W E R S T E P
Assemble brackets onto vehicle. Use provided button head
bolts (10) and washers (18) at pinch weld with captive washer
nuts (17) at pinch weld. Assemble hardware loosely. Next use
provided captive washer bolts (15) to attach bracket to underside
of body. On front mount assemble shim (27) between floor
mount and bracket as shown. Use Right facing brackets on driver
side. Mirror for passenger side.
1
Front Mounting Bracket
Slide 4 carriage bolts (14) into rail pocket of driver side rail. Adjust bolts and slide over brackets. Use
supplied flange nuts and attach rail to brackets. Center rail between body rocker and torque 4 flange nuts to
16 ft-lbs. Assemble Flange bolt (12) with nut (16) thru support tab on bracket as shown. Torque to 16ft-lbs.
Insert Threaded nut plate onto rail pocket. Light brackets will need to go rearward of Front linkage bracket
and forward of Rear linkage bracket. Leave loose to allow for adjustment.
2
www.amp-research.com
– J e e p W r a n g l e r J L
T M
Rear Mounting Bracket
25
6/11
24
26
IM77132 rev 08.07.19