Toshiba Strata DK Admin User Manual page 62

Digital business telephone systems release 4
Table of Contents

Advertisement

System/Station Administration
Attribute Definitions (continued)
Table 3
Attribute
Ringing Line
A user, by going off-hook (or by pressing the Speaker button) may be automatically
Preference
connected to the lowest line ringing in without having to press a CO line button or dial an
access button.
Automatic
Automatic Preference via handset off-hook or the Speaker button is the automatic
Preference
connection to lines or the intercom under various conditions.
Hunt to
If a station is busy, Station Hunting enables the ringing of an alternate station as defined by
Directory
the assignments in this program. If the "hunt-to" station is busy, the system tries to ring the
Number [DN]
next "hunt-to" station, and so on.
Standard
Camp-on tone is sent when the busy standard telephone receives a transferred CO line
Telephone
call. Camp-on tone is two one-second bursts of 1209Hz/interrupted by 160ms bursts,
Camp-on Tone
three-seconds apart.
Hold/Park Recall
Each station can have a different time (from 011 to 160 seconds) from the point of placing
Time
a call on hold or park to the point of recall.
MW Lamp
Turns on and off a message waiting LED for EKT and flash button.
(Off = No Lamp,
On= With Lamp)
LCD Personal
This option enables LCD digital and electronic telephones to store up to ten personal
Messages (10-
messages and offers the option of entering alphanumeric memos for each of the LCD's
19) Allowed
Station Speed Dial numbers.
Hold Display
Disables/enables the Hold Display Scroll feature independently for each telephone. When
Scroll
more than one call is on hold on a telephone, the Hold Display Scroll feature enables a
(On=Enabled)
user to scroll through the held lines.
Key 13-TR/14-TR
Determines whether or not a toll restricted telephone user is allowed to dial additional
After Answer
digits after answering an incoming CO line call. Initialized data sets both LEDs off for all
telephone users. Both LEDs should be turned on for Toll Restricted telephones that must
answer incoming CO line calls and use speed dial buttons programmed to Hold or Park
calls and access the page system automatically.
No CF/NA
A Handsfree Answerback call to an idle station in the Call Forward No-Answer or Call
Handsfree
Forward-Busy/No Answer mode does not forward if this feature is activated. This prevents
the call from being forwarded 8 ~ 60 seconds after the called party has been talking in the
handsfree talk mode (handset on-hook). Outside calls and busy intercom calls to the
station continues to forward with this feature set.
DKT2000 Cont.
2000-series Digital Telephones can send DTMF tones for as long as station users press
DTMF Tones Off
their buttons (80 msec. minimum). This feature can be disabled with LED 17. If disabled,
DTMF tones sent by these telephones are either 80 or 160 milliseconds, depending on the
selection made with Program 10-1, LED 04 and Program 10-2, LED 06.
Automatic Hold
If this feature is allowed, station users with CO line buttons can place a CO line or intercom
call on hold automatically by pressing another CO line button, or the DN/intercom button
and dialing the number.
Busy Station
Busy Station Ringing (BSR) and Busy Station Transfer (BST) operate together to ensure
Ringing/Busy
that a busy station always receives transferred line calls along with LED and tone
Station Transfer
indications. The station or Voice mail (VM)/auto attendant device that transfers the call
must be programmed with BST (LED 20 ON) and the one that receives it must have BSR
(LED 19).
Fixed Call
Fixed Call Forwarding is different from other station Call Forwarding options. It is fixed in
Forward to
terms of the destination station number which is assigned in this program. The station user
Station Port
cannot change the Fixed Call Forward destination, unlike the other station Call Forwarding
options.
Ring Transfer
If a busy or ringing station does not answer a call sent to it via call transfer (CO line or over
(Camp-on) Time
tie lines), the station originating the transfer is recalled after an amount of time determined
with this program.
52
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Description
DKAdmin/DKBackup

Advertisement

Table of Contents
loading

This manual is also suitable for:

Strata dk backup

Table of Contents