Chapter 2 - Installing Dkadmin; Step 1: Check System Requirements - Toshiba Strata DK Admin User Manual

Installing DKAdmin

Step 1: Check System Requirements

For optimum performance, run DKAdmin on a personal computer with the following
minimum specifications:
IBM-compatible Pentium® personal computer
100MB or larger hard drive
CD-ROM or 3.5" 1.44KB high-density floppy drive
DKAdmin software is distributed on a CD-ROM disk. Installation can be performed
Note
using the CD-ROM disk or from floppy disk(s) copied from the CD-ROM DKAdmin
install program.
VGA or SVGA monitor preferred
4MB RAM (minimum)
Microsoft
NT 4.0 recommended).
A laser printer is recommended
For network users, a minimum of 2MB of disk space is required for each person using
DKAdmin on the network.
DKAdmin hardware key (red)
DKAdmin is a MS-DOS program that can be installed and run under Microsoft Windows 3.11,
95, 98 and NT or MS-DOS (6.22 or higher) The installation and run instructions in this
chapter include both Windows and DOS installation information.
Important!
If your PC has Windows 3.11 installed, setting your Windows SYSTEM.INI and DOS
CONFIG.SYS files with the commands below may help DKAdmin run on your PC.
SYSTEM.INI
[NonWindowsApp]
COMMANDENVSIZE=1024
DOS CONFIG.SYS
SHELL=C:\COMMAND.COM /e:1024 /p
If DKAdmin displays a "Run time error" message during installation or operation, erase
all "ntx" files under the customer directory (XXX.DK) and the "data" directory.
Installing DKAdmin
MS-DOS 6.22, Windows 3.11 or higher (Windows 95, 98 or Windows
2
7