Table of Contents
Advertisement
Dial DK
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2. Press Enter and the Customer List displays.
3. Highlight the desired customer, and press Enter. The DKAdmin/DKBackup Main Menu
displays.
If you have multiple customers, you can use the Find function to move quickly to
Note
another customer by typing the first letter of the Customer ID number. The program
highlights the first customer which matches your entry. Press Enter to select the
highlighted customer or re-enter.
After selecting a customer, the bottom of the DKAdmin/DKBackup Main Menu displays a
box along the bottom of the screen. This box displays important information about the
customer, including the customer name, processor type, processor software version level,
feature key installed on the processor, and the disk directory (see
Customer
Name
Figure 6
Notes
If the new customer is selected, the default database for the customer's processor is loaded
into DKAdmin/DKBackup.
Software version Release 3 applies to Release 3 and Release 3.1 processors.
You now may use the options in the Backup Menu to check the DK Processor or Backup/
Restore Data.
Dial DK
The DKAdmin/DKBackup to Strata DK communications link can be made via modems,
Toshiba PDIUs or RPCIs, using the DKAdmin/DKBackup dialing strings (DIU, modem, and/
or After Connect).
Dialing strings are not necessary if the DKAdmin/DKBackup PC is connected directly to the
Strata DK TTY Port (see
Customer or Dial DK menus. DIU and Modem Initialization Strings are set from the Options/
System Installation/Communications Setup. (See
establish communications between the Strata DK and the DKAdmin/DKBackup PC.)
DKAdmin/DKBackup cannot be used to send or receive customer database information until a
physical communication path has been established between the Strata DK and the DKAdmin/
DKBackup PC.
40
Processor
Software
Version
On-screen Customer Information
Figure 16
on
Processor
Feature Key
Type
Installed on
Processor
Page
130). Dialing Strings are set using the Maintain
Appendix A – Connecting to Strata DK
Figure
6).
Disk
Directory
DKAdmin/DKBackup
1085DK
to
Advertisement
Table of Contents
