Table of Contents
Advertisement
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Security Maintenance Section
The Security Maintenance Section option (level 9 password required to access this option)
enables you to set up to three levels of security using:
Passwords - defines the functions available to users using menu-specific passwords as
described on
Program Access - defines the programs which can be used by each password level using
the Security Maintenance Section option (see
Page
78).
DK Access Code - must be entered to enable a user to send and/or receive data to/from a
Strata DK. The default for this code is 0000 and may be changed (but not viewed) by
DKAdmin users that have an allowable password level.
To limit the Strata DK programs a user may edit
1. From the
Administration Menu,
type u to display the
DK Program Security
Maintenance screen
(shown right).
The screen lists the
Strata DK programs
available for
programming or
updating. You can
limit programs a user
can access by
assigning a security
level (which corresponds to the users assigned password level).
Program access security limits direct access of programs when using the Program
Note
Administration Section Option. When using the ACD Administration Section Option,
only Programs 01, 02, 04,
denied from the normal System/Station Administration functions.
2. Highlight the S/L field of the desired program. Type the password level (0 ~ 9,
9=highest) you want to assign for accessing the program and press Enter.
For a complete list of Password/Program default levels, see
Note
(Default Levels)"
...or
to assign all the programs to a particular password level, press F2-reset. A Security Level
dialog box displays. Type the password level (0 ~ 9, 9=highest) you want to assign to all
the Strata DK programs and press Enter. A confirmation message displays. Highlight
Yes and press Enter.
The Security Level for all programs are changed to the entered password level.
3. To close the DK Program Security Maintenance screen, press Esc.
Administration Menu (DKAdmin)
Page
121.
09, VMID, MWID, and Personal Speed Dial access can be
*
on
Page
78.
Security Maintenance Section
"Program Security (Default Levels)"
"Program Security
on
77
Advertisement
Table of Contents
