Toshiba Strata DK Admin User Manual page 116

Restore Data ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
9. After reading the screen in Step 7, press Enter. The screen below displays.
Program No.
PRGALL
REPALL
NAMEALL
VIDALL
10. Highlight Yes and press Enter. You are prompted for the DK Code.
11. Enter the four-digit DK Code.
Important!
DKAdmin/DKBackup turns on LED10 in Program 77-1 and then displays the message
"You will send data to the DK. Are you sure?"
12. Highlight Yes and press Enter. You are prompted for the DK Code.
13. Enter the four-digit DK code.
Important!
DKAdmin/DKBackup begins the Restore process. After restoring data, the message
Upload Complete! displays
Before restoring data, DKAdmin/DKBackup pulls some programs (04,
Note
to arrange the data and prevent numbering conflicts.
14. Press Enter from the Process Complete screen. The information screen below displays.
You have uploaded program(s) to the DK which require
the DK to be powered off for 5 seconds and then on
again for the modifications to take effect.
DK280 Release 3 and 4 allows you to perform this task
automatically without physically turning the system
off. If desired, the system can be shut down manu-
ally.
15. Turn the system off (five seconds) and then on, or highlight Yes when you are prompted
with the message Perform automatic power OFF/ON simulation?
106
DK System Program File
Program Title
All System Programs
All Station and System Speed Dial Numbers
All User Names
All Voice Mail ID Codes (#656)
Pull Program 03 from DK to Update Customer Database?
Yes
You must enter the code programmed on the installed processor.
You must enter the code programmed on the installed processor.
No
04 and 09)
* *
DKAdmin/DKBackup