Table of Contents
Advertisement
––––––––––––––––––––––––––––––––––––––––––––––––––
If the DID Intercept Destination is the Kitchen Telephone (PDN 107), data in this program
must not be changed to adjust for port shifting caused by the RDDU DID line PCB in slot 13.
This is because Port 007 did not shift after the upgrade (see
Program * 17 data for DID lines 001~004 before the upgrade = 007
Program * 17 data for DID lines 001~004 after the upgrade = 007
Program 20
If the Front Office Telephone (PDN 112) is equipped with an RPCI-DI to display DNIS and
Caller ID on a PC running a TAPI application, the data in Program 20 must shift. This enables
the Front Office Telephone and RPCI to operate the same way after the upgrade as it did
before. Notice that all Program 20 data for port 012 moves port to 008.
Port 008
Port 012
Program 30
If the Back Room Telephone (PDN 119) is programmed to dial forced and verified Account
codes when making outside calls, the data in Program 30 must shift. This is to allow the Back
Room Telephone to operate the same way after the upgrade as it did before. Notice that all
Program 30 data for port 019 moves to port 015.
Port 015
Port 019
Program 33
If the Front Office telephone (DN 112) is programmed to hunt to the Back Room Telephone
(PDN 119), the data in Program 33 must shift:
Before the Upgrade
Hunt-From Port 012 to Port 019
If the Front Office telephone (PDN112) is programmed to hunt to the Lobby Telephone
(PDN 100), the data in Program 33 must shift:
Before the Upgrade
Hunt-From Port 012 to Port 000
Upgrading Strata DK Systems to DK424 Release 4.0
Before the Upgrade
LED17 on, all others off (Program 20
default)
LED 01,02,10, 11, and 17 on, all
others off
Before the Upgrade
LED 01, 05, and 07 ON, all others off
(Program 30 default)
LED 01, 05, 07, 08, and14 on, all
others off
Hunt-From Port 008 to Port 015
Hunt-From Port 008 to Port 000
DK424 Release 4.0 Upgrade Programming Example
Figures 33
After the Upgrade
LED 01,02,10, 11, and 17 on, all
others off
LED17 on, all others off
After the Upgrade
LED 01, 05, 07, 08, and 14 ON, all
others off
LED 01, 05, and 07 on, all others off
(Program 30 default)
After the Upgrade
After the Upgrade
and 34):
159
Advertisement
Table of Contents
