Using DKAdmin/DKBackup
This chapter shows you how to log on and off DKAdmin/DKBackup, use the pull-down
menus and select system options, respond to system and error messages, and describes the
keyboard conventions used in the programs.
Before You Start
Before using DKAdmin/DKBackup, you must:
Connect your personal computer to a Strata DK in order to send/receive data between the
DKAdmin/DKBackup PC and a Strata DK (see
for procedures).
Properly install the DKAdmin/DKBackup hardware key (see
DKAdmin
Correctly set your communications (see
Logging On
DKAdmin
To log on to DKAdmin
1. After powering up your
computer, at the C:\
prompt type CD
280ADMIN and press
Enter.
2. From the C:\280ADMIN
prompt, type dkadmin
and press Enter. The
Toshiba start-up page
displays (shown right).
3. Type your User ID and
press Enter.
4. Type your password and
press Enter.
Using DKAdmin/DKBackup
and
Chapter 3 – Installing DKBackup
Appendix A – Connecting to Strata DK
Chapter 2 – Installing
for procedures).
Chapter 8 – Options
Menu).
4
27