Table of Contents
Advertisement
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
The DK System Program File screen displays listing the available data for backup (see
screen in Step 3). For security, this code does not display on screen as you type it. The
default code is 0000. This is the "1st level password" which is set in the Strata DK
Program 00 (see the record sheet for Program 00 in the Strata DK Programming Manual).
If the Problem: Unable to Establish Communications screen displays, follow the
Note
troubleshooting steps on the screen and/or see
to correct the problem.
3. Highlight the program file you wish to back up (download) and press the spacebar to tag
(checkmark) the program file (shown below). Repeat this step for as many program files
as you wish to back up. Press F2 to tag all program files (see Note "The DK System
Program File..." on
F1
-Help SPACE-(Un)Tag
Select If Marked
4. After selecting the programs, press F3. The screen prompts with the message "You
will receive data from the DK. Are you sure?"
5. Highlight Yes and press Enter.
6. DKAdmin/DKBackup prompts you to enter the DK Code again. When the correct code is
entered, DKAdmin/DKBackup turns on LED10 in Program 77-1 and then downloads all
files selected in
7. Press Esc twice and select the next desired function.
Notes
When you back up PRGALL, the DK security code set in the DKAdmin/DKBackup
customer database, is not sent to the processor. You must always enter the DK security
code that is actually programmed on the processor installed in the Strata DK. You can
change the DK security code using the DKAdmin Program Administration Section option
or manually using the programming telephone.
Access to the DK Code should be considered highly confidential and only given to those
individuals with the security level which enables them to program or update DK data. If
changing the Strata DK Program 00 Passwords, always change both Level 1 and 2 for
security. DKAdmin/DKBackup checks both codes and runs with either code.
Backup Menu (DKBackup)
Page
102).
DK System Program File
Program No.
Program Title
PRGALL
All System Programs
REPALL
All Station and System Speed Dial Numbers
NAMEALL
All User Names
VIDALL
All Voice Mail ID Codes (#656)
MIDALL
All Voice Mail Message Waiting Codes (#657)
ADMEMOAL
All Station and System Speed Dial Memos
MSGALL
All Station and System LCD Messages
CFALL
Directory Number Call Forwarding settings (R3)
MWALL
Message Waiting Lamp settings (R3)
CLID
Caller ID/ANI Lost Call telephone numbers (R3)
F2
-(Un)Tag All
Esc-Exit
Step
3. The screen displays Download Complete when finished.
Appendix A – Connecting to Strata DK
F3
F4
-Backup
-Restore
Backup Data
F5
-Upgrade
101
Advertisement
Table of Contents
