AUMA SA Series Operation Instructions Manual page 84

Technical data
Service conditions
Corrosion protection
Coating
Colour
Accessories
Wall bracket
Programming software
Torque measurement flange DMF
Further information
Weight
EU Directives
84
SA 07.2 SA 16.2/SAR 07.2
Standard: KS: Suitable for use in areas with high salinity, almost permanent condensation, and high
pollution.
Option: KX: Suitable for use in areas with extremely high salinity, permanent condensation, and
high pollution.
Double layer powder coating
Two-component iron-mica combination
Standard: AUMA silver-grey (similar to RAL 7037)
Option: Available colours on request
For actuator controls mounted separately from the actuator, including plug/socket connector. Connecting
cable on request.
Recommended for high ambient temperatures, difficult access, or heavy vibration during service.
Cable length between actuator and actuator controls is max. 100 m (Not suitable for version with poten-
tiometer in the actuator). Instead of the potentiometer, the actuator has to be equipped with an electronic
position transmitter. (MWG requires a separate data cable.)
AUMA CDT (Commissioning and Diagnostic Tool for Windows-based PC)
AUMA Assistant App (Commissioning and Diagnostic Tool for Android devices)
Accessory for torque measurement for SA/SAR 07.2
Approx. 7 kg (with AUMA plug/socket connector)
Electromagnetic Compatibility (EMC): (2014/30/EU)
Low Voltage Directive: (2014/35/EU)
Machinery Directive: (2006/42/EC)
SAR 16.2 Control unit: electronic (MWG)
AC 01.2 Non-Intrusive HART
SA/SAR 16.2