Vmchannel Interface Connector - Matrox Meteor-II /Digital Installation And Hardware Reference

6
1
7
2
8
3
9
4
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Board input and output connectors
The pinout of the 9-pin DB9 female connector is as follows:
Pin Signal
1 TTL TRIG
2 OPTO TRIG-
3 N/C
4 N/C
5 N/C
6 GND
7 OPTO TRIG+
8 N/C
9 N/C

VMChannel interface connector

The VMChannel interface allows Matrox Meteor-II /Digital to
share data with any Matrox imaging board that has a
VMChannel interface capable of performing the bus controller
function. A VMChannel backplane (available with the
GEN-BUS/... interconnect kits) must be inserted across the
VMChannel interfaces of the boards.
Note the VMChannel is not supported on the PC/104-Plus form
factor.
top view o f board
pin 34
(component side)
pin 68
side view of board
(component side)
pin 68
Description
TTL trigger.
Opto-isolated trigger (negative input).
Not connected.
Not connected.
Not connected.
Ground.
Opto-isolated trigger (positive input).
Not connected.
Not connected.
pin 1
pin 35
pin 35
59