Matrox Meteor-Ii Hardware Reference; Matrox Meteor-Ii /Digital Grab Section - Matrox Meteor-II /Digital Installation And Hardware Reference

Table of Contents

Chapter 5: Hardware reference

Matrox Meteor-II hardware reference

This chapter provides information on the architecture,

operating modes, and supported features of the Matrox

Meteor-II /Digital board.

For a summary of the information given in this chapter and

detailed specifications of connectors and pinouts, refer to

Appendix B of this manual.

The grab section of the Matrox Meteor-II /Digital board

captures video from digital cameras. It supports component

RGB, as well as monochrome acquisition, in single or multi-tap

configurations. Up to four genlocked cameras can be attached

to acquire four 8-bit or two 16-bit inputs.

Matrox Meteor-II /Digital supports either the RS-422 or the

LVDS interface.

Note that the board does not support the Matrox Meteor-II

MJPEG module.

The following diagrams represent Matrox Meteor-II /Digital for

PCI and for PC/104-Plus, respectively.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents