Matrox Meteor-II /Digital Installation And Hardware Reference page 20

▲ Caution
Some computers have a large, black-ridged heat sink that
prevents boards from using most PCI board slots. Your
Matrox Meteor-II must not touch this heat sink. Therefore,
choose a slot where the board completely avoids it.
3. If present, remove the blank metal plate located at the back
of the selected slot. Keep the removed screw; you will need
it to fasten the Matrox Meteor-II board.
4. Carefully position Matrox Meteor-II in the selected PCI slot
as illustrated below. If you are using a tower computer,
orient the board to suit the board slots in your computer.
SCREW
METAL
PLATE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installing Matrox Meteor-II /Digital
Connectors of an AGP slot Connectors of an AGP slot
Connectors of PCI slots Connectors of PCI slots
or
Connectors of ISA slots Connectors of ISA slots
M A T R O X M
E T E O R - I I
32-BIT PCI BOARD SLOT
19
PCI form factor