Matrox Meteor-II /Digital Installation And Hardware Reference page 24

9. Set the rotary switch (next to the PC/104 (ISA) connector)
to 0 if installing the first stackable board, or another
appropriate setting if not the first. See the section, Multiple
board installation in Chapter 4.
Plus
PC/104-
(PCI) connector
10. Connect your video sources. For details, see the section
Connecting a video input to Matrox Meteor-II /Digital for
PC/104-Plus.
11. Turn on your computer.
In some cases, when you boot your computer, Windows'
Plug-and-Play system will detect a new PCI card and you
will be asked to assign a driver to it. At this point, you
should click on Cancel because the driver will be installed
during the installation of MIL or one of its derivatives.
❖
Matrox Meteor-II /Digital for PC/104-Plus can be used with
Matrox 4Sight-II. When ordered as part of the Matrox
4Sight-II unit, Matrox Meteor-II for PC/104-Plus comes
pre-installed. See the Matrox 4Sight-II installation and
hardware reference manual for more information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installing Matrox Meteor-II /Digital
Rotary
switch
Video input
interface
connectors
23
PC/104
(ISA)connector