Matrox Meteor-II /Digital Installation And Hardware Reference page 26

Connecting a video input to Matrox Meteor-II /Digital
for PCI
Connect video sources to the digital interface connector on
Matrox Meteor-II /Digital for PCI, using the optional
DBHD100-TO-OPEN cable. This cable must be customized to
fit with the connector on your video source. See Appendix B for
the pinouts, signals, and mating connector supplier.
Connecting Matrox Meteor-II /Digital to other boards
The VMChannel interface allows the transfer of data to other
Matrox boards. Insert a VMChannel backplane (available with
the interconnect kit) across the VMChannel interface to
connect the boards. Note that when connecting multiple Matrox
boards, at least one of the boards you are connecting must be
bus-controller capable. Matrox Meteor-II /Digital is not
bus-controller capable.
❖
The VMChannel is not supported on the PC/104-Plus form
factor.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connecting external devices 25