Dip Switches - Matrox Meteor-II /Digital Installation And Hardware Reference

Each jumper connects a 100
two polarities of the following signals:
Jumper B1 - B2: TRIG+, TRIG-
Jumper B3 - B6: VSYNC+, VSYNC-
Jumper B4 - B5: HSYNC+, HSYNC-
Jumper B7 - B8: CLKIN+, CLKIN-
By default, all jumpers are in place. If more than one load (for
example, two line-locked cameras) are to be connected to the
TRIG, VSYNC, HSYNC, or CLKIN, the corresponding jumpers
should be removed.

DIP switches

DIP switches are only available for the PC/104-Plus form factor.
They are replaced by jumpers on the PCI form factor (see the
previous section).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Board input and output connectors
Ω
termination resistor between the
1 2 3 4
63
(ON)