Agilent Technologies Varian CP-8400 Operator's Manual page 16

Setup and Calibration of the CP-8400/8410
ACTIVE
METHOD
[ 1 ] Edit Time and Date
[ 2 ] Edit Heated Zones
[ 3 ] Edit EFC
[ 4 ] Edit Column Parameters
[ 5 ] Edit Sample Delivery Setup
[ 6 ] Edit Miscellanous Setup Parameters
Setup Edit Menu Select item 5, Edit Sample Delivery, by pressing 5 on the
CP-3800 keypad and then pressing the Enter key.
ACTIVE
METHOD
EDIT SAMPLE DELIVERY SETUP SELECT
[ 1 ] Edit CP-8400 Setup
[ 2 ] Edit Valves
Automation Selection Select item 1, CP-8400 Setup (or Edit CP-8410 Setup
as appropriate), by pressing 1 on the CP-3800 keypad and then pressing the
Enter key.
CP-8400 AutoSampler & CP-8410 AutoInjector
EDIT
METHOD
EDIT INSTRUMENT SETUP MENU
Save and Exit
EDIT
METHOD
Save and Exit
RUN END
CTRL
TIME TIME
RUN END
CTRL
TIME
TIME
13