Gate-swing calibration
N.B.: before calibrating the travel, check that the maneuvering area is free of any obstructions.
Important! During the calibration, all safety devices will be disabled except for the PARTIAL STOP one.
Select A3. Press ENTER to confi rm ❶.
Select 1 and press ENTER to confi rm ❷.
The door will close completely ❸.
❶
3
a
The door will open until it presses and rests against the mechanical stop ❹.
Wait a few seconds to allow the calibration, appearing on the display, to register ❺.
❹
Place the opening mechanical stop against the sliding guide and fasten it.
Sliding guide
❷
1
o
p
I
Mechanical stop
❸
❺
°
C
L
I
°
°