Transmitter And Data Storage; Description Of Programming Commands; Browsing The Menu - CAME VER-PLUS Series Installation Manual

Transmitter and data storage

⚠
Before plugging in the card YOU MUST
CUT OFF THE MAINS POWER SUPPLY and,
remove any batteries.
To enter, change and delete user or to control
the operator via the radio command, fi t the
AF card.
To save/copy any system settings and
registered users, plug in the Memory Roll
card.
You must remove the Memory Roll
card, after using it.

Description of programming commands

Display
The ESC button is for:
- exiting menus;
- deleting changes;
- commanding a STOP
when the motors are in
motion.

Browsing the menu

To enter the menu, keep the ENTER key pressed for a few
seconds.
To exit the menu, wait 10 seconds or press ESC.
 When the menu is active, the system cannot be used.
- -
{
P
-
The ENTER key is for:
{
- entering menus;
- confi rming or memorizing set values.
The < > keys are for:
{
- moving from one item to another;
- increasing or decreasing a value;
- < CLOSE command;
- > OPEN command.
10"
Memory Roll