CAME VER-PLUS Series Installation Manual page 27

Decoding the
U4 radio-frequency
code
A1 Intended use
A2 Motor test
Gate-swing
A3
calibration
Resetting
A4
parameters
A5 Maneuver count
Adjusting the
A6
motor torque
H1 Version
Select the type of transmitter radio coding that you wish to save on the control
board.
⚠ When you select a radio coding, all saved transmitter are automatically
deleted.
 TWIN's coding lets you save multiple users with the same key (Key block).
1 = all of the series (default)/2 = only Rolling Code series /3 = only TWIN
series
Set the intended use.
1 = Standard installation
 The maximum lift is 20 kg beyond the necessary lifting of the window/
door.
2 = Private installation
 The maximum lift is 40 kg beyond the necessary lifting of the window/
door.
Test to verify the gear motor's proper direction of rotation (see the MOTORS
TEST paragraph).
OFF = Deactivated / ON = Activated
Automatic calibration of the door travel (see the CALIBRATION DOOR TRAVEL
paragraph)
OFF = Deactivated / ON = Activated
Caution! For restoring the default factory settings and deleting the gate travel
setting.
OFF = Deactivated / ON = Activated
For viewing the maneuvers count performed to date by the gear motor (00 =
100 maneuvers; 010 = 1,000 maneuvers; 100 = 10,000 maneuvers; 999 =
99,900 maneuvers; CSI = maintenance job).
For adjusting the motor torque from 1 minimum to 5 maximum.
1 / 2 / 3 / 4 / 5 (default)
View the fi rmware version.