Toshiba TEC B-852-TS12-QQ Owner's Manual page 86

APPENDIX 4 SYSTEM MODE
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
Back Feed Length Fine Adjustment
(Example)
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter.
The maximum back feed
lengthfine adjustment value is
±9.5mm. When the value
reaches the maximum, the
value remains unchanged even
if the subsequent fine
adjustment is performed.
Back Feed Length Fine Adjustment
With this parameter you can fine adjust the Back Feed Length. When
"<3>ADJUST SET" appears, press the [PAUSE] key 3 times.
[RESTART]
[FEED]
[FEED] key: Pressing the [FEED] key one time causes a –0.5mm
change, up to –9.5 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a
+0.5mm change, up to +9.5 mm.
After completing the fine adjustment, press the [PAUSE] key.
A4- 8
EO1-33029
A4.4 Printer Parameter Fine Adjustment