Toshiba TEC B-852-TS12-QQ Owner's Manual page 46

3. PRINTER OPERATION
3.4.5 Page Setup Tab (Cont.)
NOTE:
The Copies option is usually
set to one because most
programs know how to specify
a copy count to the driver.
Manually specify this driver
setting when using programs
that don't properly take
advantage of a printer's
copying capability. (In these
cases, be sure to leave copies
set to "1" in the program,
otherwise it will print many
more copies than desired!).
NOTE:
In order to make any changes
to the User Commands , it
will be necessary to have
knowledge of the command
programming language used to
send label commands to the
printer. Information about the
TEC Printer Command Lan-
guage is provided in TEC's
External Equipment Interface
Manual. Please contact your
TOSHIBA TEC representative
for further information
concerning this manual.
NOTE:
The Advanced Options dialog
allows control of the printer
options for which the printer
driver does not provide
explicit control. This is done
with four fill-in data fields for
user-defined commands. Also
for importing or exporting
previously specified printer
driver settings.
When the Negative check box has been checked, the print will be white
on black. When this check box is unchecked, the print will be black on
white. The preview page to the left of the orientation buttons will reflect
negative or positive print selection.
The up and down arrows of the Copies: scrolling text box can be
clicked to increase or decrease the number of copies to be printed.
When the Advanced Options button has been clicked, the screen
display will change to that shown below.
Additional Advanced Options
Printing Preferences - The following settings will allow saving or
exporting the settings of this printer driver so that they may be imported
into a different or freshly installed printer driver. It also allows importing
previously saved settings to replace the current settings of this printer
driver. The settings will be exported into a file name created and will
have a SDM extension (*.sdm)
Import - Allows importing previously saved printer driver settings.
The settings that can be imported depend on which printer driver is
being used.
Export - Allows exporting the settings of this printer driver. The
settings that can be exported depend on which printer driver is being
used.
3-19
3.4 Using the B-852 Printer Properties Menus
EO1-33029