Maintenance Page (Decode Mode)
This page allows user to maintain the GXV3500 in Decode Mode:
Restart
Restore
Upgrade via
Firmware Server Path
Figure 44: Maintenance Page (Decode)
Table 25: User Management page
When clicked, the GXV3500 will reboot or restart (soft reboot).
When clicked, the camera will be reset to factory default, wiping out all the
configurations (except IP address).
Firmware upgrade via TFTP, HTTP or HTTPS.
Sets IP address or domain name of firmware server. The URL of the server that
hosts the firmware release. Default is "fm.grandstream.com/gs".
GXV3500 User Manual
Version 1.0.3.6
P a g e
|
71