Dynamically Assigned
via DHCP
Statically Configured
as
DNS Configuration
Web Access Mode
HTTP Port
Enable LLDP
Layer 2 QoS
802.1Q/VLAN Tag
Layer 2 QoS 802.1p
Priority Value
Figure 39: Networking Page (Decode)
Table 21: Networking settings
Default setting, DHCP server assign IP to camera.
Static IP address configuration (Preferred for Port FWD).
DNS server IP. Must be configured if using static IP.
Selects the access mode to the web GUI either HTTP or HTTPS.
Specifies the TCP port for Web Access, Default is 80.
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is "Enabled".
Assigns the VLAN Tag of the Layer 2 QoS packets.
Default value is 0. Range is from 0 - 4094.
Assigns the priority value of the Layer2 QoS packets.
Default value is 0. Range is from 0 - 7.
GXV3500 User Manual
Version 1.0.3.6
P a g e
|
64