•
Click "Save" to save the settings. Following bar will display if operation successful.
Notes:
•
Voice Alarm to SIP Phone: Application example: Intercom System, press button as Alarm_In, the
pre-programmed SIP number or peer IP device will be called. If the receiver is Grandstream Video
phone, the callee can use DTMF PIN code to operate and Open Door.
•
MJPEG is NOT supported for this feature.
Alarm Event Time Schedule:
Click the "Alarm Event Time Schedule" will bring up following interface to allow user to configure the Time
Schedule for the Alarm_In to take action.
Note:
•
User has to configure the "Alarm Event Time Schedule"; otherwise the Alarm In interface will
not work if there is no time schedule configured.
Syslog Settings
This page allows user to enable the Syslog to help troubleshooting problems.
Figure 32: Alarm Event Time Schedule Configuration Page
GXV3500 User Manual
Version 1.0.3.6
P a g e
|
55