Maintenance Page (Decode Mode)
This page allows user to maintain the GXV3500 in Decode Mode:
Figure 35: Maintenance Page (Decoder)
Restart:
Restore:
Upgrade via:
Firmware Server Path:
Config Server Path:
XML Config File Password:
Grandstream Networks, Inc.
When clicked, the camera will reboot or restart (soft reboot).
When clicked, the camera will be reset to factory default, wiping out all
the configurations (except IP address)
Upgrade firmware via TFTP, HTTP or HTTPS
Server path holding the firmware
Server path holding the configuration file (auto provisioning)
Password for encrypt the XML based configuration file
GXV3500 User Manual
Firmware Version 1.0.1.94
Page 71 of 82
Last Updated: 05/2016