Grandstream Networks GXV3500 User Manual page 24

1. Connect the computer network port via an Ethernet cable directly to the IP camera GXV3500.
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and configure
the "Subnet mask" to "255.255.255.0". Leave the "Default Gateway" to "Blank" like below: (Example
of Windows platform, Apple platform is similar)
3. Power on the GXV3500.
4. Start the browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and start
to show the video captured by the camera (by default the camera enabled anonymous access)
7. Click "Configuration" icon, the browser will ask credentials to authorize configuration.
8. Enter the administrator user name and password to access the Web Configuration Interface, the
default user name and password are both set to admin.
9. In step 6, IE will indicate that "This website wants to install the following add-on: GSViewerX.cab from
Grandstream Networks Inc.", allow the installation.
10. Firefox, Chrome user need to download and install the plug-in to see the video, the plug-in is here:
http://www.grandstream.com/products/tools/surveillance/webcontrl_plugin.zip
Note:
•
Please temporarily disable Antivirus or Internet Security Software and close all browsers when
download and install the Grandstream Plug-in Software.
GXV3500 User Manual
Version 1.0.3.6
P a g e | 24