Networking Setting Page
This page allows user to configure network related parameters:
Dynamically Assigned
via DHCP
Statically Configured
as
DNS Configuration
Web Access Mode
HTTP Port
Enable LLDP
Figure 16: Networking Setting Page
Table 6: Networking Setting
Default setting, DHCP server assign IP to camera.
Static IP address configuration (Preferred for Port FWD).
DNS server IP. Must be configured if using static IP.
Selects the access mode to the web GUI either HTTP or HTTPS.
Specifies the TCP port for Web Access, Default is 80.
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is "Enabled".
GXV3500 User Manual
Version 1.0.3.6
P a g e
|
35