Gxv3501/Gxv3504 Date & Time; Gxv3501/Gxv3504 Maintenance - Grandstream Networks GXV3501 User Manual

GXV3501/GXV3504 Digital Video Server
GXV3501/GXV3504 Date & Time Page
This page allows you to configure the
system time on GXV3501/GXV3504.
Current System Time - displays the
current date and time (24h clock).
Set the Device Time
Update via NTP Server - the camera
will obtain the time from an NTP server
Specify the NTP server's IP address or
host name. And you can select your time
zone from the drop-down list or define
your own time zone setting.
NOTE: If using a host name for the NTP
server, a DNS server must be configured
under Basic Settings > Networking.
Synchronize with Local Computer - sets the time from the clock on your computer.
Set the Time Manually - this option allows you to manually set the time and date.
GXV3501/GXV3504 Maintenance Page
Server Maintenance
Restart – Click this button to restart the
GXV3501/GXV3504.
Restore – Click this button to perform a
partial factory reset (The IP address will not
be cleared) .
Firmware Upgrade and Provisioning Items
Upgrade via – This field lets you choose the
firmware upgrade method. The GXV3501/GXV3504
supports HTTP, HTTPS and TFTP.
Firmware Server Path – The IP address or domain
name of the firmware server (the location of the
firmware files) .
Automatic Upgrade Interval – Enter the frequency
(in minutes) in which the HTTP/HTTPS/TFTP server will be checked for new firmware upgrades or
configuration changes.
Automatic Upgrade – The default setting is "No." Choose "Yes" to enable automatic.
Firmware 1.0.1.18 Page 19 of 31
Grandstream Networks, Inc. 08/2009