Networking Setting Page (Decode Mode); Table 20: System Settings - Grandstream Networks GXV3500 User Manual

Current System Time
Sync with PC
Set Manually
Time Zone
Enable Day Light
Saving Time
Enable NTP
(On Screen Display)
OSD Date Format
Device Name Setting
Disable Web Access
DI and DO
Digital Input
Digital Output
DO Output Duration
Alarm Out Pattern (s)

Networking Setting Page (Decode Mode)

This page allows user to configure network related parameters:

Table 20: System settings

Display time current system is running at.
Click to synchronize current time with computer.
Click to manually set the current time and date.
Select from pull down menu the time zone unit located.
Enable and Configure Day Light Saving Start Time and End Time.
Enable and configure NTP server and update interval.
OSD Date format, choose based on user preference.
Set the name of the camera which will be shown in the result of "Search Tool" of
GSurf_Pro VMS program.
Choose to Enable/Disable HTTP Web Access
DI and DO initial status for Alarm In or Out operation.
State of Digital Input, normal at Open state.
State of Digital Output, normal at Open state
Select operation of Alarm Output Duration from pull down list.
Configure an ON/OFF cadence during that specific duration of time which the the
alarm out follow when played. Range is from 0-3. Default is 0.
When set to 0, no cadence will be applied and alarm out will be played continuously.
GXV3500 User Manual
Version 1.0.3.6
P a g e | 63