Figure 30: Motion Detection Schedule Configuration Page - Grandstream Networks GXV3500 User Manual

Record Video From Pre
Alarm up to XXX seconds to
After Alarm Up to XXX
seconds
Voice Alarm to SIP Phone
Alarm Output
Upload to Alarm Center
Upload to Alarm HTTP Server
Email and FTP upload JPEG
Motion Detection Time Schedule:
Click the " + " will expand the following interface to allow user to configure the Time Schedule for related
Motion Detection region to take action.
Notes:
•
As shown in Figure above, user can configure the Motion Detection Region with related Start and
Stop time to control the motion detection operation.
•
There are total 16 regions be available for MD configuration, from region 0 to 15.
•
Select and highlight the number of region to configure the MD and the sensitivity.
•
User has to configure the "Time Schedule"; otherwise the Motion Detection Alarm will not work if
there is no time schedule configured.
•
Grandstream free GSurf_Pro V2 VMS software can be downloaded from:
http://www.grandstream.com/sites/default/files/Resources/GSurf_Pro_V2_1.0.3.19.zip
This setting to allow configure pre/post alarm video for applications to
utilize. MJPEG is NOT supported for this feature.
If a SIP server or peer IP device configured, check this will allow MD event
to trigger alarm SIP call to pre-configured number.
Select will allow MD to send alarm to Alarm Output interface.
When checked, the alarm video will be transferred to Alarm Center, like
Grandstream free GSurf _Pro VMS software, or other 3rd party Alarm
Center.
When checked MD alarm will be send to 3rd party HTTP server via
programmed Grandstream HTTP API.
When checked, snapshots of trigger moment will be emailed to pre-
configured email account and also uploaded to FTP server if configured.
The pre/post alarm snapshot numbers can be configured based on time (in
second) to meet user's requirement.

Figure 30: Motion Detection Schedule Configuration Page

GXV3500 User Manual
Version 1.0.3.6
P a g e | 53